IPn, Noise Floor and Dynamic Range Diagram

IPn Calculation
Parameter Value
G (dB) Linear gain of the amplifier
Pout (dBm) Power of the carrier at the two-tone test
Δ (dB) Difference between the intermodulation products and the carrier at the two-tone test
N Order of the intermodulation products
Dynamic Range and Noise Floor
Parameter Value
S/I (dB) Minimum S/I required for the modulation
NF (dB) Noise Figure of the amplifier
BW (MHz) Bandwidth of the amplifier
T (K) System Temperature
Compression
Parameter Value
P1dB (dBm) Output level at which the actual fundamental power deviates 1dB from ideal (linear) output power
DUT & Frequency
Parameter Value
DUT Name or ID of the device under test (DUT)
Frequency (MHz) Frequency at which the above data was measured
See docs
Results

IIP3

24 dBm

OIP3

40 dBm

Pout @ S/I = 35 dB

15 dBm
Dynamic Range

71.7 dB
Noise floor

-65.18 dBm